Sewage & Effluent Pump Prices and Installation Costs in Chattanooga, TN

$376 to purchase a new sewage & effluent pump and $253 to have it professionally installed

Where do you need
the sewage & effluent pump work done?

Go

Budget Sewage & Effluent Pump

N/A

Macerator Pump 120 Volt

$657.99
Rating: 4.5 (4 reviews)

Bathroom Anywhere

The Macerator System ties into your home?s existing plumbing lines. When the toilet is flushed, the powerful Vortex-designed macerator quickly and quietly disintegrates waste and pumps it away up to an 18-foot vertical rise and 150-foot horizontal run! The two-piece System allows fast and easy access to the pump, if necessary, without the need to disconnect plumbing lines or fixtures. The Pump Side can be removed, while the Reservoir Tank Side stays connected to the plumbing.

Best Value Sewage & Effluent Pump

N/A

SaniBest Pro 1 HP 115-Volt Grinder Pump

$913.75

Saniflo

The SaniBest Pro is a system that is used to install a complete bathroom up to 25 ft. below the sewer line, or even up to 150 ft. away from a soil stack. The SaniBest Pro can handle the effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection). While most of our pump range consists of shredders/macerators, the SaniBest Pro incorporates an actual grinder system. The SaniBest Pro is ideal for situations where you do not control the use of it (i.e. rental unit, offices, warehouses, etc. The SaniBest Pro is designed to deal with sanitary napkins that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc. The wastewater from other sanitary fixtures is discharged into the SaniBest Pro via two 2 in. inlets on either side of the housing. The discharge elbow on top of the SaniBest Pro can be rotated 360° depending on the discharge installation. A non-return valve (included in assembly) prevents back flow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a 2-way air vent. The uses of mechanical vents, air admittance valves or similar devices are not permitted as these are considered 1-way air vent systems. It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.

High End Sewage & Effluent Pump

N/A

SaniCubic 21 HP 220/240-Volt Grinder Pump

$2719.15

Saniflo

The SaniCubic 2 is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The duplex-grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in. discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of two 1 HP motors housed inside a compact but highly durable plastic enclosure. Each independently operating grinder has its own high-performance grinding system: a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc. The SaniCubic 2 operation is as simple as the installation. The effluent enters the pump through 1 of 5 different inlets - 1 on either side of the unit at the bottom and 3 along the top. The inlets can accommodate 1-1/2 in. or 4 in. of diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in. of diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft. vertically and/or 328 ft. horizontally.


Sewage & Effluent Pump Price Distribution in Chattanooga, TN


Finance your project at 0% Interest for up to 21 months*    View Offers >

* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Average Sewage & Effluent Pump Installation Price

$253


Sewage & Effluent Pump installation Price Range

$178 to $403


Need a little help paying for your project?

  • 0% Introductory APR for up to 21 months*
  • Cash Back & Reward Options
  • No Annual Fee
  • Quick & Easy Online Application
* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Recent Services, Products and Supplies


Best Sewage & Effluent Pump Installation Contractors in Chattanooga, TN

Overall Rating:
Chattanooga Sewage & Effluent Pump Installation Contractors
are rated 4.8 out of 5 in total.
Sunshine Hvac-r, Inc. Logo
    5 reviews. 7 years in business. Insured.
3152 Linwood Rd, Watertown, TN
Torres Service Logo
    3 reviews. 12 years in business.
nashville, tn
Pike Electric Inc Logo
    2 reviews.
900 Manufacturers Rd, Chattanooga, TN
Tennessees Plumber Logo
    3 reviews. 15 years in business. Insured.
2400 Ruth St, Springfield, TN
Sadler Brothers Plumbing Logo
    4 reviews.
10326 Old Nashville Hwy, Smyrna, TN
Locke Plumbing & Electric Company, Inc. Logo
    6 reviews.
754 N. Broadway, Knoxville, TN
Straight Flush Plumbing Logo
    6 reviews. 17 years in business. Insured.
1447 Craun Hollow Rd, White Bluff, TN
County Line Pros Logo
    8 reviews. 7 years in business. Insured.
P.O. Box 6641, Knoxville, TN
C & N Handyman Services Logo
    3 reviews. 15 years in business. Insured.
1514 Ely Rd., Hixson, TN
Volunteer Water Service Logo
    3 reviews.
2239 GRAY RIDGE RD, Maryville, TN

Trending Projects near Chattanooga, TN

Shower Install Cover Photo
Plumbing Licensed, bonded and insured only! Need a replacement shower purchased and installed. Tore out the 36
Project Cost: $2200
Plumbing Repair Cover Photo
Looking for someone to do a rough in.
Project Cost: $350
TOILET REPAIR Cover Photo
NEED BROKEN FLUSH VALVE REPLACED, NEW TANK BOLTS 3 BOLT TANK, MURFREESBORO OUT 231 TOWARDS CHRISTIANA,
Project Cost: $122
Plumber Cover Photo
Install new toilet flange. The existing flange is bent, and the toilet rocks when placed on flange. It is on a
Project Cost: $252
Faucet Cover Photo
Installing faucet in kitchen
Project Cost: $130
Ro Unit  Cover Photo
Install ro unit Water Filtration system Faucet for the icemake
Project Cost: $175
Need Plumber Small job Cover Photo
Looking for someone to fix facets i laundry room and to fix why it want drain 237_3377
Project Cost: $250
Licensed Plumber Cover Photo
Licensed Plumber We are a nationwide company doing bath renovations in the Nashville area. We are currently
Project Cost: $1870
Looking For Good Plumbers Cover Photo
Looking For Good Plumbers I'm looking for good plumbers for piece work 45.00 to install new valves in baths
Project Cost: $75
Handyman Needed Cover Photo
Knowledgeable Handyman Needed I attempted to turn the water on in the bathroom shower and the faucet fell
Project Cost: $60
Fix The Toilet Cover Photo
Replacing toilets
Project Cost: $193
Tubs Cover Photo
Tub needs recaulking/sealing. One needs to get done ASAP (the standard shower/tub), the other standard & the
Project Cost: $213
Refrigerator Cover Photo
Refrigerator water line Plumbing : the current water opening for refrigerator is in south east corner of kitch
Project Cost: $120
Gas Plumbing  Cover Photo
Gas range installation: already have gas connection. Need to run it through kitchen
Project Cost: $685
Plumbing Cover Photo
PLUMBER NEEDED!! NEED PLUMBER TO UNCLOG DRAINS.
Project Cost: $141

Recent Financed Projects in Chattanooga, TN

Loans near  Fenwood Dr, Knoxville TN
Wells and Pumps Loans near Fenwood Dr, Knoxville TN
    

Wells and Pumps

Estimated Project Value: $2300

Loan Amount: $2500

Loans near  Misty Mountain Cir, Knoxville TN
Plumbing Loans near Misty Mountain Cir, Knoxville TN
    

Plumber

Estimated Project Value: $400

Loan Amount: $500

Loans near  Wendi Ann Dr, Knoxville TN
Plumbing Loans near Wendi Ann Dr, Knoxville TN
    

Plumber

Estimated Project Value: $400

Loan Amount: $500

Loans near  Harrison Glen Ln, Knoxville TN
Wells and Pumps Loans near Harrison Glen Ln, Knoxville TN
    

Wells and Pumps

Estimated Project Value: $3800

Loan Amount: $4500

Loans near  Armiger Ln, Knoxville TN
Plumbing Loans near Armiger Ln, Knoxville TN
    

Plumber

Estimated Project Value: $500

Loan Amount: $500

Loans near  Grande Shores Way, Knoxville TN
Plumbing Loans near Grande Shores Way, Knoxville TN
    

Plumber

Estimated Project Value: $400

Loan Amount: $500

Loans near  E Red Bud Rd, Knoxville TN
Wells and Pumps Loans near E Red Bud Rd, Knoxville TN
    

Wells and Pumps

Estimated Project Value: $1000

Loan Amount: $1000

Loans near  W Sunset Rd, Knoxville TN
Wells and Pumps Loans near W Sunset Rd, Knoxville TN
    

Wells and Pumps

Estimated Project Value: $5700

Loan Amount: $5500

Loans near  Mountain Hill Ln, Knoxville TN
Plumbing Loans near Mountain Hill Ln, Knoxville TN
    

Plumber

Estimated Project Value: $600

Loan Amount: $500

Loans near  Key Hole Ln, Knoxville TN
Plumbing Loans near Key Hole Ln, Knoxville TN
    

Plumber

Estimated Project Value: $500

Loan Amount: $500

GoSmith, Inc. © 2017 Smith.
All Rights Reserved.