Sewage & Effluent Pump Prices and Installation Costs in Omaha, NE

$374 to purchase a new sewage & effluent pump and $251 to have it professionally installed

Where do you need
the sewage & effluent pump work done?

Go

Budget Sewage & Effluent Pump

N/A

SaniPlus 0.5 HP 115-Volt Macerator Pump

$743.75
Rating: 4 (89 reviews)

Saniflo

The SaniPlus is a system that is used to install a complete bathroom up to 15 ft. below the sewer line, or even up to 150 ft. away from a soil stack. It can handle the effluent from a toilet, sink, bathtub and shower. The inside of the SaniPlus comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the SaniPlus activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The unit pumps the effluent upward to 15 ft. and/or 150 ft. horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again. A normal operating cycle for SaniPlus takes about 10 to 15 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. In addition to the toilet waste, the SaniPlus will also discharge gray water from a variety of other.

Best Value Sewage & Effluent Pump

N/A

SaniBest Pro 1 HP 115-Volt Grinder Pump

$913.75

Saniflo

The SaniBest Pro is a system that is used to install a complete bathroom up to 25 ft. below the sewer line, or even up to 150 ft. away from a soil stack. The SaniBest Pro can handle the effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection). While most of our pump range consists of shredders/macerators, the SaniBest Pro incorporates an actual grinder system. The SaniBest Pro is ideal for situations where you do not control the use of it (i.e. rental unit, offices, warehouses, etc. The SaniBest Pro is designed to deal with sanitary napkins that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc. The wastewater from other sanitary fixtures is discharged into the SaniBest Pro via two 2 in. inlets on either side of the housing. The discharge elbow on top of the SaniBest Pro can be rotated 360° depending on the discharge installation. A non-return valve (included in assembly) prevents back flow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a 2-way air vent. The uses of mechanical vents, air admittance valves or similar devices are not permitted as these are considered 1-way air vent systems. It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.

High End Sewage & Effluent Pump

N/A

SaniCubic 21 HP 220/240-Volt Grinder Pump

$2719.15

Saniflo

The SaniCubic 2 is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The duplex-grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in. discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of two 1 HP motors housed inside a compact but highly durable plastic enclosure. Each independently operating grinder has its own high-performance grinding system: a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc. The SaniCubic 2 operation is as simple as the installation. The effluent enters the pump through 1 of 5 different inlets - 1 on either side of the unit at the bottom and 3 along the top. The inlets can accommodate 1-1/2 in. or 4 in. of diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in. of diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft. vertically and/or 328 ft. horizontally.


Sewage & Effluent Pump Price Distribution in Omaha, NE


Finance your project at 0% Interest for up to 21 months*    View Offers >

* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Average Sewage & Effluent Pump Installation Price

$251


Sewage & Effluent Pump installation Price Range

$176 to $401


Need a little help paying for your project?

  • 0% Introductory APR for up to 21 months*
  • Cash Back & Reward Options
  • No Annual Fee
  • Quick & Easy Online Application
* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Recent Services, Products and Supplies


Best Sewage & Effluent Pump Installation Contractors in Omaha, NE

Overall Rating:
Omaha Sewage & Effluent Pump Installation Contractors
are rated 4.9 out of 5 in total.
Eyman Plumbing, Heating & Air Conditioning Logo
    7 reviews. 55 years in business. Insured.
8506 S 117th St, La Vista, NE
Mr. Rooter Plumbing of Lincoln Logo
    6 reviews. Insured.
1700 Saltillo Rd, Roca, NE
Major Drain Logo
    1 review. Insured.
7914 W Dodge Rd # 345, Omaha, NE
Thomas Plumbing Service Inc Logo
    4 reviews.
20202 Patton StSte B, Gretna, NE

Trending Projects near Omaha, NE

Needing a Kitchen Sink Replaced Cover Photo
Looking for someone to replace our kitchen sink. Just not enough time in the day for me to finish this
Project Cost: $150
Need Plumbing And Drywall Finished Cover Photo
Fire damaged home need bids to fix plumbing incl permits and drywall house may lead to more work if you can
Project Cost: $4925
Need Someone to 4 Shut off Vales  Stops  Underneath 2 Bathroom Sinks  Cover Photo
I am looking for a plumber to install stops for both bathroom sinks.
Project Cost: $87
Plumber Needed Cover Photo
Need someone with Plumbing abilities and Tools. I have an issue with the kitchen sink; Draining straight to
Project Cost: $68
Under Decking Cover Photo
water diversion system under deck Deck is 12 ft by 48 feet long. System does not need to be elaborate, just
Project Cost: $2578
Plumber Gig - We Have a Sink That Doesn t Drain Well Cover Photo
I'm looking for someone who can come unclog the pipes in our sink. This is a bathroom sink, it does drain, it
Project Cost: $111
Drainage Trench Cover Photo
Help digging a drainage trench. Need help asap. Looking for someone to handle this type of wor
Project Cost: $62
Mainline And Water Heater Cover Photo
mainline sewer replacemen
Project Cost: N/A
Small Plumbing job Cover Photo
Need plumber to come over in morning, remove vanity/faucet and toilet. Snake the bathtub because drains slow.
Project Cost: $270
Plumber Needed Cover Photo
Need a plumber to install a bar sink, vanity sink, and shower valve (single handle - positemp). Thank you.
Project Cost: $350
Waste King 8000 Install Cover Photo
Garbage Disposa
Project Cost: $207
Fix Indoor Leaking Water Pipe Cover Photo
need someone to fix this. See pictures. Looks like it is because the two pipes have been sitting together but
Project Cost: $139
Pit Gas Line Cover Photo
Running a gas line to our fire pit with 1 inch pipe. The pit is built already on a gravel bed in the corner
Project Cost: $2000
Plumbing Help Needed  Cover Photo
I need a plumber to tap into a water supply from one side of a wall to the other. Basically "y" tap hot & cold
Project Cost: $112
Johnson Cover Photo
Plumbing: well pump
Project Cost: $225

Recent Financed Projects in Omaha, NE

Loans near  Frederick St, Omaha NE
Plumbing Loans near Frederick St, Omaha NE
    

Plumber

Estimated Project Value: $500

Loan Amount: $500

Loans near  S  St, Omaha NE
Plumbing Loans near S St, Omaha NE
    

Plumber

Estimated Project Value: $600

Loan Amount: $500

Loans near  N th St, Omaha NE
Plumbing Loans near N th St, Omaha NE
    

Plumber

Estimated Project Value: $500

Loan Amount: $500

Loans near  Camelback Ave, Omaha NE
Plumbing Loans near Camelback Ave, Omaha NE
    

Plumber

Estimated Project Value: $600

Loan Amount: $500

Loans near  S  St, Omaha NE
Wells and Pumps Loans near S St, Omaha NE
    

Wells and Pumps

Estimated Project Value: $2100

Loan Amount: $2500

Loans near  S th St, Omaha NE
Plumbing Loans near S th St, Omaha NE
    

Plumber

Estimated Project Value: $400

Loan Amount: $500

Loans near  Laurel Ave, Omaha NE
Wells and Pumps Loans near Laurel Ave, Omaha NE
    

Wells and Pumps

Estimated Project Value: $5600

Loan Amount: $5000

Loans near  N  St, Omaha NE
Wells and Pumps Loans near N St, Omaha NE
    

Wells and Pumps

Estimated Project Value: $9700

Loan Amount: $12000

Loans near  N  St, Omaha NE
Plumbing Loans near N St, Omaha NE
    

Plumber

Estimated Project Value: $500

Loan Amount: $500

Loans near  Fawn Pkwy, Omaha NE
Wells and Pumps Loans near Fawn Pkwy, Omaha NE
    

Wells and Pumps

Estimated Project Value: $8000

Loan Amount: $7500

GoSmith, Inc. © 2017 Smith.
All Rights Reserved.