Sewage & Effluent Pump Prices and Installation Costs in Washington, DC

$376 to purchase a new sewage & effluent pump and $253 to have it professionally installed

Where do you need
the sewage & effluent pump work done?

Go

Budget Sewage & Effluent Pump

N/A

1/2 HP Heavy Duty Submersible Sewage Pump

$291
Rating: 4.4 (89 reviews)

ECO FLO

The ECO-FLO 1/2 HP heavy duty sewage Pump is designed to drain sewage waste from residential sources. It is manufactured with an all cast iron motor housing and base. The motor is an energy efficient permanent split capacitor design.

Best Value Sewage & Effluent Pump

N/A

16S Series 1 HP Submersible Sewage Pump

$821.2

Little GIANT

The 16S Series submersible pump from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas.

High End Sewage & Effluent Pump

N/A

SaniCubic 21 HP 220/240-Volt Grinder Pump

$2719.15

Saniflo

The SaniCubic 2 is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The duplex-grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in. discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of two 1 HP motors housed inside a compact but highly durable plastic enclosure. Each independently operating grinder has its own high-performance grinding system: a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc. The SaniCubic 2 operation is as simple as the installation. The effluent enters the pump through 1 of 5 different inlets - 1 on either side of the unit at the bottom and 3 along the top. The inlets can accommodate 1-1/2 in. or 4 in. of diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in. of diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft. vertically and/or 328 ft. horizontally.


Sewage & Effluent Pump Price Distribution in Washington, DC


Finance your project at 0% Interest for up to 21 months*    View Offers >

* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Average Sewage & Effluent Pump Installation Price

$253


Sewage & Effluent Pump installation Price Range

$178 to $403


Need a little help paying for your project?

  • 0% Introductory APR for up to 21 months*
  • Cash Back & Reward Options
  • No Annual Fee
  • Quick & Easy Online Application
* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Recent Services, Products and Supplies


Best Sewage & Effluent Pump Installation Contractors in Washington, DC

Overall Rating:
Washington Sewage & Effluent Pump Installation Contractors
are rated 5 out of 5 in total.
Capital Village Services, LLC Logo
    4 reviews. 10 years in business. Insured.
PO Box 4591, Washington, DC

Trending Projects near Washington, DC

Plumber to Hook up Kitchen Sink and Garbage Disposal Cover Photo
Plumber to Hook up Kitchen Sink and Garbage Disposal Just had the kitchen redone. We now need the sink drain
Project Cost: $317
Plumbing to Install 5 Bathroom Faucets Cover Photo
Plumbing to Install 5 Bathroom Faucets Hey plumber, if you are going to give your company standards and
Project Cost: $1000
Leak Repair Cover Photo
Looking for someone to repair the leak in the water line to the house. Dug a 5 feet deep hole where WSSC told
Project Cost: $1750
Home Project Cover Photo
Looking to move and connect pipes. Must be able to rethread and cap pipes. Please include phone and
Project Cost: $80
Handyman plumber to Repair Kohler Leaky Valve Cover Photo
Handymanplumber to Repair Kohler Leaky Valve I need to replace flush valve in one piece Kohler toilet by an
Project Cost: $85
Plumber Needed to Install Water Shut off Walve Cover Photo
Plumber Needed to Install Water Shut off Walve I have a pipe that feeds water to 8 washers. I'm looking for a
Project Cost: $1200
Someone To Install Sump Pump  Cover Photo
Need someone to install a sump pump in my basement.
Project Cost: $150
Plumber Needed to Install Shut off Valve Cover Photo
I need a plumber to install a shut off valve. The pipe has already been cut. You just need to install the
Project Cost: $216
Leak Repair  Cover Photo
Need Experienced Affordable Plumber in New Carrollton Md-leaky Faucet I have a leaky upstairs faucet and also
Project Cost: $225
Pressure Tank Replaced  Cover Photo
I need pressure tank replaced. I have the new tank already and want to use the parts from the 1 year old, old
Project Cost: $192
Gas Line Fireplace Installation Cover Photo
Looking for someone to run a line from a natural gas line to a a fireplace. To run the gas from the incoming l
Project Cost: $1300
I Kitchen Faucets Installation Cover Photo
I Need Kitchen Faucets Installation I need kitchen faucets installation .
Project Cost: $141
Reattach Toilet To Flange Cover Photo
Looking for someone that can remove the toilet and fix the pipe and seal.We noticed the Toilet has broken loos
Project Cost: $125
Plumbing Cover Photo
We're looking for a licensed plumber seeking a small and quick side job. We need to have an outdated air gap
Project Cost: $135
Plumbing Cover Photo
Need a plumber who can do a honest reliable job of installing a functioning toilet and a shower stall in the b
Project Cost: $3491

Recent Financed Projects in Washington, DC

Loans near  th St NW , Washington DC
Wells and Pumps Loans near th St NW, Washington DC
    

Wells and Pumps

Estimated Project Value: $4500

Loan Amount: $4000

Loans near  Rhode Island Ave NW L, Washington DC
Wells and Pumps Loans near Rhode Island Ave NW L, Washington DC
    

Wells and Pumps

Estimated Project Value: $9400

Loan Amount: $8000

Loans near  H St NW , Washington DC
Plumbing Loans near H St NW, Washington DC
    

Plumber

Estimated Project Value: $400

Loan Amount: $500

Loans near  th St NE , Washington DC
Wells and Pumps Loans near th St NE, Washington DC
    

Wells and Pumps

Estimated Project Value: $9100

Loan Amount: $9000

Loans near  th St SE , Washington DC
Wells and Pumps Loans near th St SE, Washington DC
    

Wells and Pumps

Estimated Project Value: $5400

Loan Amount: $5500

Loans near  Channing St NE, Washington DC
Plumbing Loans near Channing St NE, Washington DC
    

Plumber

Estimated Project Value: $400

Loan Amount: $500

Loans near  R St NW , Washington DC
Wells and Pumps Loans near R St NW, Washington DC
    

Wells and Pumps

Estimated Project Value: $8300

Loan Amount: $8000

Loans near  nd St NE , Washington DC
Plumbing Loans near nd St NE, Washington DC
    

Plumber

Estimated Project Value: $500

Loan Amount: $500

Loans near  Mintwood Pl NW , Washington DC
Wells and Pumps Loans near Mintwood Pl NW, Washington DC
    

Wells and Pumps

Estimated Project Value: $13300

Loan Amount: $15500

Loans near  Halley Ter SE , Washington DC
Wells and Pumps Loans near Halley Ter SE, Washington DC
    

Wells and Pumps

Estimated Project Value: $2300

Loan Amount: $2500

GoSmith, Inc. © 2017 Smith.
All Rights Reserved.