Sewage & Effluent Pump Prices and Installation Costs in Yonkers, NY

$375 to purchase a new sewage & effluent pump and $252 to have it professionally installed

Where do you need
the sewage & effluent pump work done?

Go

Budget Sewage & Effluent Pump

N/A

SaniPlus 0.5 HP 115-Volt Macerator Pump

$743.75
Rating: 4 (89 reviews)

Saniflo

The SaniPlus is a system that is used to install a complete bathroom up to 15 ft. below the sewer line, or even up to 150 ft. away from a soil stack. It can handle the effluent from a toilet, sink, bathtub and shower. The inside of the SaniPlus comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the SaniPlus activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The unit pumps the effluent upward to 15 ft. and/or 150 ft. horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again. A normal operating cycle for SaniPlus takes about 10 to 15 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. In addition to the toilet waste, the SaniPlus will also discharge gray water from a variety of other.

Best Value Sewage & Effluent Pump

N/A

SaniBest Pro 1 HP 115-Volt Grinder Pump

$913.75

Saniflo

The SaniBest Pro is a system that is used to install a complete bathroom up to 25 ft. below the sewer line, or even up to 150 ft. away from a soil stack. The SaniBest Pro can handle the effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection). While most of our pump range consists of shredders/macerators, the SaniBest Pro incorporates an actual grinder system. The SaniBest Pro is ideal for situations where you do not control the use of it (i.e. rental unit, offices, warehouses, etc. The SaniBest Pro is designed to deal with sanitary napkins that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc. The wastewater from other sanitary fixtures is discharged into the SaniBest Pro via two 2 in. inlets on either side of the housing. The discharge elbow on top of the SaniBest Pro can be rotated 360° depending on the discharge installation. A non-return valve (included in assembly) prevents back flow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a 2-way air vent. The uses of mechanical vents, air admittance valves or similar devices are not permitted as these are considered 1-way air vent systems. It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.

High End Sewage & Effluent Pump

N/A

SaniCubic 21 HP 220/240-Volt Grinder Pump

$2719.15

Saniflo

The SaniCubic 2 is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The duplex-grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in. discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of two 1 HP motors housed inside a compact but highly durable plastic enclosure. Each independently operating grinder has its own high-performance grinding system: a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc. The SaniCubic 2 operation is as simple as the installation. The effluent enters the pump through 1 of 5 different inlets - 1 on either side of the unit at the bottom and 3 along the top. The inlets can accommodate 1-1/2 in. or 4 in. of diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in. of diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft. vertically and/or 328 ft. horizontally.


Sewage & Effluent Pump Price Distribution in Yonkers, NY


Finance your project at 0% Interest for up to 21 months*    View Offers >

* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Average Sewage & Effluent Pump Installation Price

$252


Sewage & Effluent Pump installation Price Range

$177 to $402


Need a little help paying for your project?

  • 0% Introductory APR for up to 21 months*
  • Cash Back & Reward Options
  • No Annual Fee
  • Quick & Easy Online Application
* There is no guarantee you will be approved for credit or that upon approval you will qualify for the advertised rates, fees, or terms.

Recent Services, Products and Supplies


Best Sewage & Effluent Pump Installation Contractors in Yonkers, NY

Overall Rating:
Yonkers Sewage & Effluent Pump Installation Contractors
are rated 4.4 out of 5 in total.
T.a.co. Service Dept. Logo
    4 reviews. 57 years in business. Insured.
2417 Jericho Tpke, Garden City Park, NY
A-All Plumbing Heating & Air Conditioning Logo
    11 reviews. 25 years in business. Insured.
104 Union Avenue, Lynbrook, NY
Cartellis Plumbing & Htg INC Logo
    4 reviews.
870 Middle Country Rd, St James, NY
Reuven Tenam Plumbing - Residential Plumbing Logo
    7 reviews. 25 years in business. Insured.
1034 Rogers Ave, Brooklyn, NY
Spirit & Truth Plumbing &heating Logo
    5 reviews. 14 years in business. Insured.
P.O.Box 355, Salisbury Mills, NY
Airteck Plumbing Heating & A/C Logo
    8 reviews. 35 years in business. Insured.
239 Wyngate Dr, Massapequa, NY
Lumber & Hardware Metropolitan Logo
    5 reviews.
617 11th Ave, New York, NY
Pipe Doctor Logo
    1 review. 22 years in business. Insured.
91 Traverse Road, Lake Peekskill, NY
Einsteins Plumbing & Heating Inc Logo
    5 reviews.
91 Winant Pl, Staten Island, NY
C&l Plumbing And Heating Logo
    4 reviews. Insured.
4460 U.S Highway 209, Stone Ridge, NY

Trending Projects near Yonkers, NY

Gas Line Plumbing  Cover Photo
License plumber needed to replace one gas line to the boiler, to stop leak. Con Ed closed main valve until job
Project Cost: $2150
Plumbing  Cover Photo
Licensed and Coi only. Kitchen plumbing. Moving waste and water lines over 2ft for sin
Project Cost: $1250
Pressure Testing Of An Outdoor Pool Pipe Cover Photo
Looking for someone to come and pressure test the pipes of the outdoor swimming pool and ensure that the corre
Project Cost: $1500
Plumbing Cover Photo
plumbin
Project Cost: $2750
Plumbing Cover Photo
Plumbing
Project Cost: $5500
Uss Cover Photo
Change toilet
Project Cost: $330
Toilet Install Cover Photo
removed. And install a new toilet basic model I m going to buy the toilet.
Project Cost: $209
Fix Leak Around Window Cover Photo
Fix Leak Around Window Looking for Contractor to fix leak around window Call
Project Cost: $200
Toilet Cover Photo
Toilet seat installatio
Project Cost: $116
Some Piping Replaced  Cover Photo
Piece of cast iron trap broke. Please send with rough estimate, and how long it would take approx
Project Cost: $2000
Toilet Bowl Replacement  Cover Photo
To replace a toilet bowl
Project Cost: $314
Backyard Shower Cover Photo
The shower in the backyard is leaking
Project Cost: $231
Licensed Newburgh Plumber Cover Photo
Licensed Newburgh Plumber Needed Looking for a licensed Newburgh plumber to perform work at a few houses.
Project Cost: $80
Plumbing Cover Photo
Installing 2 new toilets
Project Cost: $276
Looking for a Plumber Cover Photo
Looking for a Plumber looking for someone that knows how to do plumbing, have a sink that needs to be fixed
Project Cost: $85

Recent Financed Projects in Yonkers, NY

Loans near  Storey Ln, Yonkers NY
Plumbing Loans near Storey Ln, Yonkers NY
    

Plumber

Estimated Project Value: $1000

Loan Amount: $1000

Loans near  Voorhees Ave, Buffalo NY
Wells and Pumps Loans near Voorhees Ave, Buffalo NY
    

Wells and Pumps

Estimated Project Value: $5900

Loan Amount: $5500

Loans near  Bronx River Rd H, Yonkers NY
Wells and Pumps Loans near Bronx River Rd H, Yonkers NY
    

Wells and Pumps

Estimated Project Value: $4700

Loan Amount: $5500

Loans near  Loepere St, Buffalo NY
Plumbing Loans near Loepere St, Buffalo NY
    

Plumber

Estimated Project Value: $1200

Loan Amount: $1000

Loans near  Christopher Dr, Buffalo NY
Wells and Pumps Loans near Christopher Dr, Buffalo NY
    

Wells and Pumps

Estimated Project Value: $4900

Loan Amount: $5500

Loans near  Parkhurst Blvd, Buffalo NY
Wells and Pumps Loans near Parkhurst Blvd, Buffalo NY
    

Wells and Pumps

Estimated Project Value: $2900

Loan Amount: $3000

Loans near  Young Ave, Yonkers NY
Plumbing Loans near Young Ave, Yonkers NY
    

Plumber

Estimated Project Value: $1100

Loan Amount: $1000

Loans near  Tulane, Buffalo NY
Plumbing Loans near Tulane, Buffalo NY
    

Plumber

Estimated Project Value: $1100

Loan Amount: $1000

Loans near  Riverdale Ave , Yonkers NY
Plumbing Loans near Riverdale Ave, Yonkers NY
    

Plumber

Estimated Project Value: $1000

Loan Amount: $1000

Loans near  Trelawne Dr, Rochester NY
Plumbing Loans near Trelawne Dr, Rochester NY
    

Plumber

Estimated Project Value: $1100

Loan Amount: $1000

GoSmith, Inc. © 2017 Smith.
All Rights Reserved.